0

49er Kit

Description

49er Kit is the complete kit designed by Nathan Outtridge and Iain Jensen to reduce the wear and tear, friction and possible failure.

Specifications and applications
Stripes of UHMWPE with with acrylic adhesive on liner:
-2 stripes 125 micron (5mil) translucent, 51mm (2") wide, 200mm (8") long for the pole launcher
-1 stripe 500 micron (20mil) translucent, 51mm (2") wide, 3m (3.3 yds) long for the pole on deck
-2 stripe 500 micron (20mil) translucent, 25mm (1") wide, 50mm (2") long front of the foot straps
-2 stripes 76 micron (3mil) translucent, 25mm (1") wide, 50mm (2") long control line holes
-2 stripes 76 micron (3mil) translucent, 25mm (1") wide, 50mm (2") long trapeze shockcord holes
-2 stripes 76 micron (3mil) translucent, 51mm (2") wide, 1m (1.1yds) long side of the mast for the jib sheet
-2 squares 500 micron (20mil) translucent, 51mm (2") x 51mm (2") mainsheet ratchet block
-2 squares 250 micron (10mil) translucent, 51mm (2") x 51mm (2") boom outhaul
-1 stripe 125 micron (5mil) translucent, 25mm (1") wide, 1m (1.1yds) long for the rudder stock gap
-1 stripe 250 micron (10mil) translucent, 25mm (1") wide, 1m (1.1yds) long for the rudder stock gap
-1 stripe 500 micron (20mil) translucent, 25mm (1") wide, 1m (1.1yds) long for the rudder stock gap

Stripes of PTFE with with silicon adhesive on liner:
-2 stripes 125 micron (5mil) light grey,  100mm (4") wide, 400mm (16") long to be applied inside the kite throat
-2 stripes 125 micron (5mil) light grey,  25mm (1") wide, 100mm (4") long for the top vang block
-2 stripes 125 micron (5mil) light grey,  25mm (1") wide, 100mm (4") long for the bottom vang block
-1 stripe 250 micron (10mil) light grey,  51mm (2") wide, 2m (2.2yds) long for jib luff

PTFE tape with silicon adhesive linerless:
-1 roll 50 micron (2mil) light grey 12mm (1/2") wide, 33m (36yds) long for rigging

Packaging
Crystal clear PET clamshell with eurohole and barcode

130,15 €
Sales price: 130,15 €
Number boxs in packaging: 1
Number boxs in box:1

copyright - facebook