Kit

PROtect KIT are small kits suitable for Optimist, Laser®, Moth and Skiff, 49er, Nacra, dinghies or small boats.
Every kit has been designed and optimized by product specialist and professional sailor to satisfy demanding sailors.

Laser
Laser ® Mast Disk is a 1mm tick disk with a diameter of 65mm to be placed into the mast step and avoid abrasion.
Laser ® Wear Kit, two stripes of UHMWPE and acrylic adhesive to be placed on the mast, down to mast step and mast deck collar area to avoid any wearing and tearing.
Laser ® Kit gathers the above two items plus a selection of six CHAFE tapes for snug fit ot the top and bottom mast sections, deck abrasion from the tiller, making more slippery the outhaul and finally some squared for the centre board.
PML001 Laser ® Wear Kit, 2 stripes, 500 micron, 51mm wide, 200mm long
PML002 Laser ® Mast Disk, 1mm, diameter 65mm
PML004 Laser ® Mast snug fit, PCT125 17mm and 30mm, 2m long for snug fit of top and bottom sections
PML007 Laser ® Squares are 5 squares of PCT250 with adhesive and liner, 30x30mm for the centre board case
PML003 Laser ® Kit contains:

  • 2 stripes, 500 micron, 51mm wide, 200mm long (PML001)
  • 2 disks, 1mm, diameter 65mm (PML002)
  • PCT125 17mm and 30mm, 2m long for snug fit of top and bottom sections of the mast (PML004)
  • PCT250 34mm, 150mm for the tiller abrasion
  • PCT250 150mm x 300mm for the outhaul
  • PCT250 5 squares 30 x 30mm for the centre board

Moth and Skiff Kit (PMK001)has been developped by Simon Payne and contains a large selections of PROtect CHAFE and MASK to protect the trampolines and wings, four tapes of different gauges to stop the centreboard slope, 6 meters of UHMWPE tape for the cambers, one thin film for the outhaul and one all purposes tape for rigging and all uneven surface. The kit contains:

  • PCT250 51mm x 6m for the cambers
  • PCT250 51mm x 1.5m for the wings and trampolines
  • PCT500 25mm x 1m to stop centreboard slop
  • PCT250 25mm x 1m to stop centreboard slop
  • PCT125 25mm x 1m to stop centreboard slop
  • PCT076 25mm x 1m to stop centreboard slop
  • PCT125 51mm x 2m for the outhaul
  • PMG050012330 rigging tape

Optimist Kit (PMK066) has been developped by Fernando "Happy" Alegre and contains a large selection of UHMWPE tapes with acrylic adhesive and skived PTFE tapes with high temperature silicon adhesive and PTFE disks. The kit contains 29 items to improve the boat performance and minimize the risk of equipment damages and avoid any possible failure fully compliant to the IODA class rules.
Tapes are die cut, with liner and easy to apply on:

  • mast and mast slot
  • sprit
  • daggerboard slot
  • outhaul
  • rigging
  • handbailer 

Dinghy 12' Kit (PMK120) has been developed by sailors and contains selection of UHMWPE tapes with acrylic adhesive and skived PTFE tapes with high temperature silicon adhesive  The kit contains 28 items to improve the boat performance and minimize the risk of equipment damages and avoid any possible failure fully compliant to the class rules.

Tapes are die cut, with liner and easy to apply on:

  • gaff
  • mast
  • benches
  • cam cleat
  • outhaul
  • centreboard
  • rigging

Patches (PMK002) contains six PROtect CHAFE patches ready to be applied and contains

  • PCT125 150mm x 150mm 2 pieces
  • PCT250 150mm x 150mm 2 pieces
  • PCT250 50mm x 150mm 2 pieces

Packaging
PML001/002/004/007 and PMK002 crystal clear BOPP bag with Eurohole and barcode
PMK066, PML003, PMK001, PMK049, PMK120 clear PET clamshell with Eurohole and barcode

.

copyright - facebook